|
Please note that this page does not hosts or makes available any of the listed filenames. You
cannot download any of those files from here.
|
| 01.Advanced Sketching - 01.Polygon.mp4 |
1.70MB |
| 01.Advanced Sketching - 02.Ellipse.mp4 |
2.61MB |
| 01.Advanced Sketching - 03.Partial Ellipse.mp4 |
2.75MB |
| 01.Advanced Sketching - 04.Parabola.mp4 |
3.13MB |
| 01.Advanced Sketching - 05.Conic.mp4 |
3.66MB |
| 01.Advanced Sketching - 06.Splines.mp4 |
4.58MB |
| 01.Advanced Sketching - 07.Splitting Entities.mp4 |
1.70MB |
| 01.Advanced Sketching - 08.Derived Sketches.mp4 |
3.46MB |
| 01.Advanced Sketching - 09.Sketch Xpert.mp4 |
4.61MB |
| 01.Advanced Sketching - 10.Sketch Picture.mp4 |
5.93MB |
| 01.Advanced Sketching - 11.AutoTrace.mp4 |
4.42MB |
| 01.Advanced Sketching - 12.3D Sketching Intro.mp4 |
5.34MB |
| 01.Advanced Sketching - 13.3D Sketching.mp4 |
8.76MB |
| 01.Advanced Sketching - 14.3D Sketch Planes.mp4 |
6.55MB |
| 01.Appearances - 01.Introduction.mp4 |
2.92MB |
| 01.Appearances - 01.Introduction.mp4 |
2.92MB |
| 01.Appearances - 02.Appearances - Part A.mp4 |
4.57MB |
| 01.Appearances - 02.Appearances - Part A.mp4 |
4.57MB |
| 01.Appearances - 03.Appearances - Part B.mp4 |
4.26MB |
| 01.Appearances - 03.Appearances - Part B.mp4 |
4.26MB |
| 01.Appearances - 04.Copy and Paste Options.mp4 |
4.13MB |
| 01.Appearances - 04.Copy and Paste Options.mp4 |
4.13MB |
| 01.Appearances - 05.Textural Appearances.mp4 |
4.96MB |
| 01.Appearances - 05.Textural Appearances.mp4 |
4.96MB |
| 01.Appearances - 06.Advanced Mapping Options.mp4 |
6.10MB |
| 01.Appearances - 06.Advanced Mapping Options.mp4 |
6.10MB |
| 01.Appearances - 07.Surface Properties.mp4 |
5.54MB |
| 01.Appearances - 07.Surface Properties.mp4 |
5.54MB |
| 01.Appearances - 08.Appearance Illumination.mp4 |
1.10MB |
| 01.Appearances - 08.Appearance Illumination.mp4 |
1.10MB |
| 01.Assembly Structure - 01.Creating Sub-Assemblies.mp4 |
12.02MB |
| 01.Assembly Structure - 02.Flexible Sub-Assemblies.mp4 |
3.42MB |
| 01.Assembly Structure - 03.Empty Sub-Assemblies.mp4 |
2.99MB |
| 01.Assembly Structure - 04.Folders vs Sub-Assemblies.mp4 |
4.93MB |
| 01.Assembly Structure - 05.Sub-Assemblies in Drawings.mp4 |
3.69MB |
| 01.DimXpert - 01.Course Introduction.mp4 |
4.29MB |
| 01.DimXpert - 02.Overview of DimXpert.mp4 |
3.24MB |
| 01.DimXpert - 03.Auto Dimension.mp4 |
10.01MB |
| 01.DimXpert - 04.Datums.mp4 |
3.66MB |
| 01.DimXpert - 05.SizeDimensions.mp4 |
3.48MB |
| 01.DimXpert - 06.Location Dimension.mp4 |
3.32MB |
| 01.DimXpert - 07.Geometric Tolerance.mp4 |
3.38MB |
| 01.DimXpert - 08.Tolerance Status.mp4 |
3.74MB |
| 01.DimXpert - 09.DimXpert Options.mp4 |
4.89MB |
| 01.DimXpert - 10.Using DimXpert Information in Drawings.mp4 |
2.88MB |
| 01.DimXpert - 11.Pattern Feature.mp4 |
5.69MB |
| 01.DimXpert - 12.DimXpert Exercise - Part I.mp4 |
10.23MB |
| 01.DimXpert - 13.DimXpert Exercise - Part II.mp4 |
6.91MB |
| 01.Drawings - 01.Intro to Drawings.mp4 |
7.36MB |
| 01.Drawings - 02.Model View.mp4 |
7.80MB |
| 01.Drawings - 03.Projected View.mp4 |
1.03MB |
| 01.Drawings - 04.Auxiliary View.mp4 |
1.42MB |
| 01.Drawings - 05.Section Views I.mp4 |
4.08MB |
| 01.Drawings - 06.Section Views II.mp4 |
7.68MB |
| 01.Drawings - 07.Assembly Section View.mp4 |
3.04MB |
| 01.Drawings - 08.Detail View.mp4 |
2.69MB |
| 01.Drawings - 09.Broken View.mp4 |
1.75MB |
| 01.Drawings - 10.Assembly Exploded View.mp4 |
3.58MB |
| 01.Drawings - 11.Display Options.mp4 |
1.91MB |
| 01.Drawings - 12.View Alignment.mp4 |
1.40MB |
| 01.Drawings - 13.Scale.mp4 |
2.83MB |
| 01.Drawings - 14.Dimensions.mp4 |
4.60MB |
| 01.Drawings - 15.Driving Dimensions.mp4 |
5.89MB |
| 01.Drawings - 16.Driven Dimensions.mp4 |
4.71MB |
| 01.Drawings - 17.Ordinate Dimensions.mp4 |
2.08MB |
| 01.Drawings - 18.Baseline Dimensions.mp4 |
2.56MB |
| 01.Drawings - 19.Centermarks.mp4 |
3.81MB |
| 01.Drawings - 20.Note Annotations.mp4 |
8.80MB |
| 01.Drawings - 21.Bill of Materials.mp4 |
5.42MB |
| 01.Drawings - 22.BOMs - Advanced Options.mp4 |
6.14MB |
| 01.Drawings - 23.Linking BOMS.mp4 |
4.63MB |
| 01.Drawings - 24.Balloons.mp4 |
5.46MB |
| 01.Drawings - 25.Magnetic Lines.mp4 |
7.18MB |
| 01.Drawings - 26.Create Custom Templates.mp4 |
5.78MB |
| 01.Drawings - 27.Custom Sheet Format.mp4 |
4.04MB |
| 01.Drawings - 28.Custom Properties ang! Parametrnc Notes.mp4 |
7.47MB |
| 01.Drawings - 29.Formatting Dimensions.mp4 |
3.84MB |
| 01.File Management - 01.File Relationships.mp4 |
6.76MB |
| 01.File Management - 02.References.mp4 |
7.81MB |
| 01.File Management - 03.Renaming Parts - Save As.mp4 |
7.10MB |
| 01.File Management - 04.Renaming Parts - SolidWorks Explorer.mp4 |
4.15MB |
| 01.File Management - 05.Document Revisions A.mp4 |
3.04MB |
| 01.File Management - 06.Document Revisions B.mp4 |
6.80MB |
| 01.File Management - 07.Reloading and Replacing.mp4 |
4.56MB |
| 01.Fundamentals - 01.Working with Files in 2013.mp4 |
5.43MB |
| 01.Fundamentals - 02.Interface.mp4 |
5.12MB |
| 01.Fundamentals - 03.View Manipulation.mp4 |
9.77MB |
| 01.Fundamentals - 04.Measure Tool.mp4 |
2.77MB |
| 01.Fundamentals - 05.Searching Options and Sounds.mp4 |
1.93MB |
| 01.Fundamentals - 06.Appearances.mp4 |
7.95MB |
| 01.Fundamentals - 07.PhotoView 360.mp4 |
4.31MB |
| 01.Fundamentals - 08.CAD Admin Dashboard.mp4 |
9.38MB |
| 01.Introduction - 01.Course Introduction.mp4 |
1.29MB |
| 01.Introduction - 02.SolidWorks Overview.mp4 |
7.30MB |
| 01.Introduction - 03.Interface.mp4 |
8.12MB |
| 01.Introduction - 04.Task Pane Resources.mp4 |
4.19MB |
| 01.Introduction - 05.View Manipulation.mp4 |
8.79MB |
| 01.Introduction to CAMWorks - 01.CAMWorks Interface.mp4 |
3.25MB |
| 01.Introduction to CAMWorks - 02.Process Overview.mp4 |
1.93MB |
| 01.Introduction to CAMWorks Milling - 01.CAMWorks Interface.mp4 |
3.25MB |
| 01.Introduction to CAMWorks Milling - 02.Process Overview.mp4 |
1.93MB |
| 01.Introduction to eDrawings - 01.eDrawings Overview.mp4 |
15.10MB |
| 01.Introduction to eDrawings - 02.Embedding and Sharing eDrawings files.mp4 |
6.32MB |
| 01.Introduction to eDrawings - 03.Additional Options and Saving as HTML.mp4 |
7.89MB |
| 01.Introduction to eDrawings - 04.Professional and Premium Options.mp4 |
7.49MB |
| 01.Mold Tools - Core and Cavity - 01.Draft Analysis A.mp4 |
12.83MB |
| 01.Mold Tools - Core and Cavity - 02.Draft Analysis B.mp4 |
2.44MB |
| 01.Mold Tools - Core and Cavity - 03.Scale.mp4 |
3.31MB |
| 01.Mold Tools - Core and Cavity - 04.Parting Lines.mp4 |
4.39MB |
| 01.Mold Tools - Core and Cavity - 05.Shut Off Surfaces.mp4 |
5.51MB |
| 01.Mold Tools - Core and Cavity - 06.Parting Surface.mp4 |
2.33MB |
| 01.Mold Tools - Core and Cavity - 07.Creating the Mold.mp4 |
6.43MB |
| 01.Mold Tools - Core and Cavity - 08.Side Cores A.mp4 |
5.94MB |
| 01.Mold Tools - Core and Cavity - 09.Side Cores B.mp4 |
6.56MB |
| 01.Mold Tools - Core and Cavity - 10.Intersect.mp4 |
2.21MB |
| 01.Overview - 01.About this Course.mp4 |
6.28MB |
| 01.Overview - 02.What is SolidWorks_.mp4 |
1.66MB |
| 01.Overview - 03.Interface Tour.mp4 |
9.05MB |
| 01.Overview - 04.View Manipulation.mp4 |
12.08MB |
| 01.PhotoView 360 Basics - 01.Introduction.mp4 |
2.70MB |
| 01.PhotoView 360 Basics - 02.Scene Settings.mp4 |
5.82MB |
| 01.PhotoView 360 Basics - 03.APP_ying Appearances.mp4 |
4.44MB |
| 01.PhotoView 360 Basics - 04.Orienting the Model.mp4 |
1.40MB |
| 01.PhotoView 360 Basics - 05.Creating a Camera.mp4 |
7.29MB |
| 01.PhotoView 360 Basics - 06.Rendering the Image.mp4 |
8.35MB |
| 01.Sheet Metal Design - 01.Introduction to Sheet Metal.mp4 |
1.55MB |
| 01.Sheet Metal Design - 02.Base Flange 1.mp4 |
6.51MB |
| 01.Sheet Metal Design - 03.Base Flange 2.mp4 |
5.60MB |
| 01.Sheet Metal Design - 04.Bend Allowance.mp4 |
3.71MB |
| 01.Sheet Metal Design - 05.Bend Tables.mp4 |
4.82MB |
| 01.Sheet Metal Design - 06.Flat Pattern Options.mp4 |
7.59MB |
| 01.Sheet Metal Design - 07.Corner Trim.mp4 |
4.86MB |
| 01.Sheet Metal Design - 08.Edge Flange 1.mp4 |
5.96MB |
| 01.Sheet Metal Design - 09.Edge Flange 2.mp4 |
5.64MB |
| 01.Sheet Metal Design - 10.Edge Flange 3.mp4 |
3.16MB |
| 01.Sheet Metal Design - 11.Miter Flange.mp4 |
8.67MB |
| 01.Sheet Metal Design - 12.Swept Flange.mp4 |
6.89MB |
| 01.Sheet Metal Design - 13.Tab.mp4 |
2.09MB |
| 01.Sheet Metal Design - 14.Sketched Bend.mp4 |
3.84MB |
| 01.Sheet Metal Design - 15.Jog.mp4 |
4.89MB |
| 01.Sheet Metal Design - 16.Hem.mp4 |
3.25MB |
| 01.Sheet Metal Design - 17.Closed Corner.mp4 |
5.28MB |
| 01.Sheet Metal Design - 18.Break Corner.mp4 |
1.79MB |
| 01.Sheet Metal Design - 19.Fold and Unfold.mp4 |
3.16MB |
| 01.Sheet Metal Design - 20.Sheet Metal Cuts.mp4 |
3.98MB |
| 01.Sheet Metal Design - 21.Cuts Across Bends.mp4 |
4.78MB |
| 01.Sheet Metal Design - 22.Cross Breaks.mp4 |
4.40MB |
| 01.Sheet Metal Design - 23.Cones and Cylinders.mp4 |
4.33MB |
| 01.Sheet Metal Design - 24.Lofted Bends.mp4 |
3.53MB |
| 01.Sheet Metal Design - 25.Multibody Sheet Metal Parts.mp4 |
12.96MB |
| 01.SimulationXpress - 01.Overview.mp4 |
2.85MB |
| 01.SimulationXpress - 02.Assumptions.mp4 |
5.93MB |
| 01.SimulationXpress - 03.Starting an Analysis.mp4 |
3.56MB |
| 01.SimulationXpress - 04.Units.mp4 |
1.99MB |
| 01.SimulationXpress - 05.Applying Fixtures.mp4 |
7.74MB |
| 01.SimulationXpress - 06.Applying Loads.mp4 |
8.72MB |
| 01.SimulationXpress - 07.Applying a Material.mp4 |
3.31MB |
| 01.SimulationXpress - 08.Running the Simulation.mp4 |
6.02MB |
| 01.SimulationXpress - 09.Interpreting Results - Stress and Dlsplacement.mp4 |
7.90MB |
| 01.SimulationXpress - 10.Factor of Safety.mp4 |
5.23MB |
| 01.SimulationXpress - 11.Output and Reports.mp4 |
4.27MB |
| 01.SimulationXpress - 12.Optimizing a Design.mp4 |
8.23MB |
| 01.SimulationXpress - 13.Summary.mp4 |
1.64MB |
| 01.SolidWorks Certification - 01.Why Get Certified.mp4 |
1.32MB |
| 01.SolidWorks Certification - 02.Preparing for the Exam.mp4 |
2.35MB |
| 01.SolidWorks Certification - 03.What is the CSWA.mp4 |
5.24MB |
| 01.SolidWorks Certification - 04.What is the CSWP.mp4 |
4.79MB |
| 01.SolidWorks Certification - 05.CSWE and Other Certifications.mp4 |
2.75MB |
| 01.SolidWorks Certification - 06.SolidWorks Versions.mp4 |
2.91MB |
| 01.SolidWorks Certification - 07.Purchasing and Setting Up the Exam.mp4 |
7.52MB |
| 01.SolidWorks Certification - 08.Test Taking Strategy.mp4 |
7.55MB |
| 01.SolidWorks Certification - 09.Modeling Question Preview.mp4 |
7.55MB |
| 01.SolidWorks Certification - 10.Practice Exams.mp4 |
1.68MB |
| 01.SolidWorks Certification - 11.Preparing for the Exam.mp4 |
5.80MB |
| 01.SolidWorks Certification - 12.Test Taking Strategy.mp4 |
8.78MB |
| 01.SolidWorks Certification - 13.Course Overview.mp4 |
1.17MB |
| 01.Surfacing - 01.What is a Surface.mp4 |
2.56MB |
| 01.Surfacing - 02.Basic Surfaces.mp4 |
6.02MB |
| 01.Surfacing - 03.Planar Surfaces.mp4 |
1.67MB |
| 01.Surfacing - 04.Ruled Surfaces Part A.mp4 |
4.08MB |
| 01.Surfacing - 05.Ruled Surfaces Part B.mp4 |
6.64MB |
| 01.Surfacing - 06.Offset Surfaces.mp4 |
1.62MB |
| 01.Surfacing - 07.Knit Surfaces.mp4 |
5.68MB |
| 01.Surfacing - 08.Trimming Surfaces Part A.mp4 |
5.50MB |
| 01.Surfacing - 09.Trimming Surfaces Part B.mp4 |
5.03MB |
| 01.Surfacing - 10.Extending Surfaces.mp4 |
2.28MB |
| 01.Surfacing - 11.Untrimming Surfaces.mp4 |
3.98MB |
| 01.Surfacing - 12.Deleting Holes.mp4 |
2.75MB |
| 01.Surfacing - 13.Surface to Solid Conversion.mp4 |
6.37MB |
| 01.Surfacing - 14.Filled Surfaces.mp4 |
5.51MB |
| 01.Surfacing - 15.Delete Faces.mp4 |
3.83MB |
| 01.Surfacing - 16.Move Faces.mp4 |
1.37MB |
| 01.Surfacing - 17.Replace Face.mp4 |
2.64MB |
| 01.Surfacing - 18.Cutting with Surface.mp4 |
2.60MB |
| 01.Surfacing - 19.Freeforms Part A.mp4 |
7.84MB |
| 01.Surfacing - 20.Freeforms Part B.mp4 |
7.89MB |
| 01.Surfacing - 21.Boundary Surfaces.mp4 |
4.28MB |
| 01.The Design Library - 01.Introduction.mp4 |
1.46MB |
| 01.The Design Library - 02.Applying Library Features.mp4 |
3.40MB |
| 01.The Design Library - 03.Adding Custom Features to the Library.mp4 |
5.97MB |
| 01.The Design Library - 04.Editing and Locating the Library Feature.mp4 |
2.74MB |
| 01.The Design Library - 05.Changes to Library Features.mp4 |
3.69MB |
| 01.Weldments - 01.Introduction.mp4 |
2.62MB |
| 01.Weldments - 02.Structural Members.mp4 |
8.80MB |
| 01.Weldments - 03.Layout Sketches.mp4 |
6.52MB |
| 01.Weldments - 04.Trim and Extend Part A.mp4 |
6.83MB |
| 01.Weldments - 05.Trim and Extend Part B.mp4 |
9.09MB |
| 01.Weldments - 06.Plates and Fillet Beads.mp4 |
5.33MB |
| 01.Weldments - 07.Gussets and End Caps.mp4 |
9.09MB |
| 01.Weldments - 08.Weld Beads.mp4 |
11.47MB |
| 01.Weldments - 09.Weldment Bounding Boxes.mp4 |
2.96MB |
| 01.Weldments - 10.Cut Lists - Part A.mp4 |
7.88MB |
| 01.Weldments - 11.Cut Lists - Part B.mp4 |
4.47MB |
| 01.Weldments - 12.Weld Tables.mp4 |
3.24MB |
| 01.Weldments - 13.Creating Sub Weldments.mp4 |
7.92MB |
| 01.Weldments - 14.Creating Custom Profiles.mp4 |
4.36MB |
| 02.Assembly Features - 01.Assembly Feature.mp4 |
3.63MB |
| 02.Assembly Features - 02.Feature Scope.mp4 |
4.72MB |
| 02.Assembly Features - 03.Assembly Fillets.mp4 |
4.48MB |
| 02.Assembly Features - 04.Assembly Chamfers.mp4 |
3.99MB |
| 02.Assembly Features - 05.Weld Beads.mp4 |
3.68MB |
| 02.Assembly Features - 06.Hole Series.mp4 |
6.21MB |
| 02.Assembly Features - 07.Smart Components.mp4 |
14.84MB |
| 02.Assembly Features - 08.Belts and Chains.mp4 |
6.67MB |
| 02.Assembly Features - 09.Swept Cut.mp4 |
1.89MB |
| 02.CAMWorks 2.5 Axis Milling - 01.Intro to 2.5 Axis Milling.mp4 |
989.23KB |
| 02.CAMWorks 2.5 Axis Milling - 02.Defining the Machine.mp4 |
7.83MB |
| 02.CAMWorks 2.5 Axis Milling - 03.Defining the Stock - Bounding Box.mp4 |
3.86MB |
| 02.CAMWorks 2.5 Axis Milling - 04.Defining Stock from STL.mp4 |
2.16MB |
| 02.CAMWorks 2.5 Axis Milling - 05.Defining the Stock - Sketch.mp4 |
6.69MB |
| 02.CAMWorks 2.5 Axis Milling - 06.Defining Features Automatically.mp4 |
8.14MB |
| 02.CAMWorks 2.5 Axis Milling - 07.Defining Features Interactively.mp4 |
6.47MB |
| 02.CAMWorks 2.5 Axis Milling - 08.Generate Operation Plan.mp4 |
5.88MB |
| 02.CAMWorks 2.5 Axis Milling - 09.Program Zero.mp4 |
3.35MB |
| 02.CAMWorks 2.5 Axis Milling - 10.Generating Toolpaths.mp4 |
2.05MB |
| 02.CAMWorks 2.5 Axis Milling - 11.Simulate Toolpaths.mp4 |
8.90MB |
| 02.CAMWorks 2.5 Axis Milling - 12.Reordering Operations.mp4 |
1.40MB |
| 02.CAMWorks 2.5 Axis Milling - 13.Operation Parameters - Tool Adjustments.mp4 |
5.03MB |
| 02.CAMWorks 2.5 Axis Milling - 14.Operation Parameters - Feeds and Speeds.mp4 |
1.81MB |
| 02.CAMWorks 2.5 Axis Milling - 15.Adjusting Operations - Roughing A.mp4 |
10.60MB |
| 02.CAMWorks 2.5 Axis Milling - 16.VoluMill.mp4 |
7.83MB |
| 02.CAMWorks 2.5 Axis Milling - 17.Adjusting Operations - Roughing B.mp4 |
7.74MB |
| 02.CAMWorks 2.5 Axis Milling - 18.Adjusting Operations - NC Parameters.mp4 |
3.63MB |
| 02.CAMWorks 2.5 Axis Milling - 19.Feature Options.mp4 |
10.98MB |
| 02.CAMWorks 2.5 Axis Milling - 20.Optimizing Toolpaths.mp4 |
7.26MB |
| 02.CAMWorks 2.5 Axis Milling - 21.Contour Operations.mp4 |
12.66MB |
| 02.CAMWorks 2.5 Axis Milling - 22.Creating Setup Sheets.mp4 |
3.10MB |
| 02.CAMWorks 2.5 Axis Milling - 23.Post Processing Toolpaths.mp4 |
4.70MB |
| 02.CAMWorks 2.5 Axis Milling - 24.Inserting Additional Operations.mp4 |
5.58MB |
| 02.CAMWorks 2.5 Axis Milling - 25.Sorting Operations.mp4 |
4.90MB |
| 02.CAMWorks 2.5 Axis Milling - 26.Combining & Linking Operations.mp4 |
5.33MB |
| 02.CAMWorks 2.5 Axis Milling - 27.Inserting Avoid Areas.mp4 |
9.23MB |
| 02.CAMWorks 2.5 Axis Milling - 28.Inserting Contains.mp4 |
3.84MB |
| 02.CAMWorks 2.5 Axis Milling - 29.Part Exercise - A.mp4 |
7.93MB |
| 02.CAMWorks 2.5 Axis Milling - 30.Part Exercise - B.mp4 |
4.66MB |
| 02.CAMWorks 2.5 Axis Milling - 31.Part Exercise - C.mp4 |
4.22MB |
| 02.CSWA Part Model - 01.Where to Begin.mp4 |
3.98MB |
| 02.CSWA Part Model - 02.The Central Cylinder.mp4 |
12.95MB |
| 02.CSWA Part Model - 03.The Top Fork.mp4 |
10.94MB |
| 02.CSWA Part Model - 04.The Lower Fork.mp4 |
7.76MB |
| 02.CSWA Part Model - 05.Adding Fillets.mp4 |
3.74MB |
| 02.CSWA Part Model - 06.Answering the Question.mp4 |
5.82MB |
| 02.CSWA Part Model - 07.Updating the Geometry.mp4 |
3.17MB |
| 02.Curves - 01.Helixes and Spirals.mp4 |
2.96MB |
| 02.Curves - 02.Curve Through XYZ Points.mp4 |
6.41MB |
| 02.Curves - 03.Composite Curve.mp4 |
2.65MB |
| 02.Curves - 04.Curve Through Reference Points.mp4 |
1.56MB |
| 02.Curves - 05.Projected Curves.mp4 |
2.87MB |
| 02.Curves - 06.Intersection Curves.mp4 |
3.93MB |
| 02.Exercises - 01.Exercise Introduction.mp4 |
1.03MB |
| 02.Exercises - 02.Exercise I - Crank Shaft.mp4 |
14.58MB |
| 02.Exercises - 03.Exercise II - Pipe Reducer.mp4 |
19.16MB |
| 02.Exercises and Techniques - 01.Satellite Receiver - Part 1 Standard and Custom Views.mp4 |
5.00MB |
| 02.Exercises and Techniques - 02.Satellite Receiver - Part 2 Adding Blooms.mp4 |
2.29MB |
| 02.Exercises and Techniques - 03.Beer Bottle - Part 1 Decals.mp4 |
2.23MB |
| 02.Exercises and Techniques - 04.Beer Bottle - Part 2 Setting up the Scene.mp4 |
5.82MB |
| 02.Exercises and Techniques - 05.Beer Bottle - Part 3 Caustics and Rendering.mp4 |
6.73MB |
| 02.Fastening Features - 01.Mounting Boss.mp4 |
6.56MB |
| 02.Fastening Features - 02.Snap Hook.mp4 |
3.30MB |
| 02.Fastening Features - 03.Snap Groove.mp4 |
5.11MB |
| 02.Fastening Features - 04.Vent Feature.mp4 |
4.37MB |
| 02.Fastening Features - 05.Lip and Groove.mp4 |
7.47MB |
| 02.Intro to Part Design - 01.Starting a Part.mp4 |
4.25MB |
| 02.Intro to Part Design - 02.Starting a Sketch.mp4 |
12.78MB |
| 02.Intro to Part Design - 03.Sketch Tools.mp4 |
15.49MB |
| 02.Intro to Part Design - 04.Geometric Relations.mp4 |
16.47MB |
| 02.Intro to Part Design - 05.Dimensions.mp4 |
14.20MB |
| 02.Intro to Part Design - 06.Extrude Feature.mp4 |
6.14MB |
| 02.Intro to Part Design - 07.Editing Geometry.mp4 |
5.50MB |
| 02.Library Features - 01.Design Library - Cuts.mp4 |
2.04MB |
| 02.Library Features - 02.Forming Tools.mp4 |
2.51MB |
| 02.Library Features - 03.Forming Tools vs Derived Parts.mp4 |
4.84MB |
| 02.Library Features - 04.Modifying Forming Tools.mp4 |
7.82MB |
| 02.Library Features - 05.Creating New Forming Tools.mp4 |
8.47MB |
| 02.Scenes - 01.Scenes Overview.mp4 |
1.87MB |
| 02.Scenes - 01.Scenes Overview.mp4 |
1.87MB |
| 02.Scenes - 02.Editing Scenes.mp4 |
2.75MB |
| 02.Scenes - 02.Editing Scenes.mp4 |
2.75MB |
| 02.Scenes - 03.Background Images.mp4 |
3.53MB |
| 02.Scenes - 03.Background Images.mp4 |
3.53MB |
| 02.Scenes - 04.Adding Depth.mp4 |
8.62MB |
| 02.Scenes - 04.Adding Depth.mp4 |
8.62MB |
| 02.Scenes - 05.Environment Images.mp4 |
3.52MB |
| 02.Scenes - 05.Environment Images.mp4 |
3.52MB |
| 02.Sketching - 01.Conic Curves.mp4 |
8.87MB |
| 02.Sketching - 02.Sketch Dimension Input.mp4 |
2.85MB |
| 02.The Sketcher - 01.The Sketcher.mp4 |
6.36MB |
| 02.The Sketcher - 02.Lines.mp4 |
6.93MB |
| 02.The Sketcher - 03.Rectangles.mp4 |
4.22MB |
| 02.The Sketcher - 04.Circles & Arcs.mp4 |
9.09MB |
| 02.The Sketcher - 05.Automatic Relations.mp4 |
8.72MB |
| 02.The Sketcher - 06.Geometric Relations.mp4 |
6.98MB |
| 02.The Sketcher - 07.Dimensions.mp4 |
7.79MB |
| 02.The Sketcher - 08.Numeric Sketch Input.mp4 |
4.98MB |
| 02.The Sketcher - 09.Fully Deflned Sketches.mp4 |
4.23MB |
| 02.The Sketcher - 10.Over Defined Sketches.mp4 |
7.49MB |
| 02.The Sketcher - 11.Sketch Fillets.mp4 |
5.37MB |
| 02.The Sketcher - 12.Sketch Mirroring.mp4 |
1.73MB |
| 02.The Sketcher - 13.Sketch Patterns.mp4 |
6.08MB |
| 02.The Sketcher - 14.Offset Entities.mp4 |
1.82MB |
| 02.The Sketcher - 15.Trim Tools.mp4 |
3.35MB |
| 02.The Sketcher - 16.Convert Entities.mp4 |
5.17MB |
| 02.The Sketcher - 17.Sketches on Faces.mp4 |
3.10MB |
| 02.The Sketcher - 18.Rapid Sketch.mp4 |
3.05MB |
| 02.The Sketcher - 19.Sketched Text.mp4 |
2.20MB |
| 02.TolAnalyst - 01.ToIAnaIyst Overview.mp4 |
2.44MB |
| 02.TolAnalyst - 02.Establishing a Measurement.mp4 |
4.00MB |
| 02.TolAnalyst - 03.Assembly Sequence.mp4 |
1.88MB |
| 02.TolAnalyst - 04.Assembly Constraints.mp4 |
4.70MB |
| 02.TolAnalyst - 05.Analyzing Results.mp4 |
5.48MB |
| 02.TolAnalyst - 06.Floating vs Fixed Fasteners.mp4 |
4.04MB |
| 02.TolAnalyst - 07.TolAnalyst Exercise.mp4 |
8.57MB |
| 02.Toolbox - 01.Toolbox Overview.mp4 |
3.74MB |
| 02.Toolbox - 02.Setting Up and Adding in the Toolbox.mp4 |
6.98MB |
| 02.Toolbox - 03.Inserting Toolbox Components.mp4 |
4.47MB |
| 02.Toolbox - 04.Replacing Hardware.mp4 |
3.23MB |
| 02.Toolbox - 05.Hardware Stackups.mp4 |
7.01MB |
| 02.Toolbox - 06.Smart Components.mp4 |
11.51MB |
| 02.Toolbox - 07.Other Tools.mp4 |
2.90MB |
| 02.Toolbox - 08.Toolbox Settings.mp4 |
9.11MB |
| 02.Turning - 01.Introduction.mp4 |
723.88KB |
| 02.Turning - 02.Defining the Machine.mp4 |
9.30MB |
| 02.Turning - 03.Setup Tab.mp4 |
3.45MB |
| 02.Turning - 04.Defining the Stock - Bar Stock.mp4 |
3.40MB |
| 02.Turning - 05.Defining the Stock WIP file and STL.mp4 |
1.87MB |
| 02.Turning - 06.Defining the Stock Revolve Sketch.mp4 |
4.60MB |
| 02.Turning - 07.Defining Features Automatically.mp4 |
3.57MB |
| 02.Turning - 08.Defining Features Interactively.mp4 |
6.20MB |
| 02.Turning - 09.Generating an Operation Plan.mp4 |
5.44MB |
| 02.Turning - 10.Generating Tool Paths.mp4 |
1.89MB |
| 02.Turning - 11.Simulating Tool Paths.mp4 |
10.33MB |
| 02.Turning - 12.Tool Adjustments.mp4 |
6.04MB |
| 02.Turning - 13.Roughing Options.mp4 |
6.99MB |
| 02.Turning - 14.Finishing Options.mp4 |
4.27MB |
| 02.Turning - 15.Rough Grooving Options.mp4 |
10.20MB |
| 02.Turning - 16.Finish Grooving Options.mp4 |
1.81MB |
| 02.Turning - 17.NC Options.mp4 |
6.52MB |
| 02.Turning - 18.Leadin Leadout Options.mp4 |
3.34MB |
| 02.Turning - 19.Create Setup Sheets.mp4 |
3.59MB |
| 02.Turning - 20.Post Processing.mp4 |
4.35MB |
| 02.Turning - 21.Inserting Operations.mp4 |
5.11MB |
| 02.Turning - 22.Setting Up a Chuck.mp4 |
8.89MB |
| 03.Advanced Fillets - 01.Fillet Options.mp4 |
6.18MB |
| 03.Advanced Fillets - 02.Variable Radius Fillets.mp4 |
8.96MB |
| 03.Advanced Fillets - 03.Face Fillets.mp4 |
2.20MB |
| 03.Advanced Fillets - 04.Hold Line Fillets.mp4 |
1.81MB |
| 03.Advanced Fillets - 05.Curvature Continuous Fillets.mp4 |
1.95MB |
| 03.Advanced Fillets - 06.Full Round Fillets.mp4 |
1.71MB |
| 03.Advanced Fillets - 07.Fillet Xpert.mp4 |
6.60MB |
| 03.Advanced Fillets - 08.Corner Xpert.mp4 |
4.58MB |
| 03.Appendix - 01.Custom Materials.mp4 |
3.88MB |
| 03.Appendix - 02.Split Line.mp4 |
4.04MB |
| 03.Bracket - 01.Overview of Design.mp4 |
9.39MB |
| 03.Bracket - 02.Creating the Base Feature.mp4 |
7.71MB |
| 03.Bracket - 03.The Tab.mp4 |
27.46MB |
| 03.Bracket - 04.Hole in Tab.mp4 |
9.93MB |
| 03.Bracket - 05.Mirror Feature.mp4 |
5.55MB |
| 03.Bracket - 06.Rollback Bar and Order of Features.mp4 |
6.47MB |
| 03.Bracket - 07.Hole Wizard.mp4 |
14.63MB |
| 03.Bracket - 08.Fillets.mp4 |
11.55MB |
| 03.Component Patterns - 01.Linear Patterns.mp4 |
8.26MB |
| 03.Component Patterns - 02.Circular Patterns.mp4 |
4.20MB |
| 03.Component Patterns - 03.Feature Driven Patterns.mp4 |
5.73MB |
| 03.Component Patterns - 04.Mirroring Components.mp4 |
6.48MB |
| 03.Convert to Sheet Metal - 01.Convert to Sheet Metal.mp4 |
9.27MB |
| 03.Convert to Sheet Metal - 02.The Rip Feature.mp4 |
6.44MB |
| 03.Convert to Sheet Metal - 03.Insert Bends.mp4 |
5.29MB |
| 03.CSWA Assembly Model - 01.Problem Overview.mp4 |
4.55MB |
| 03.CSWA Assembly Model - 02.Modeling the Parts.mp4 |
8.07MB |
| 03.CSWA Assembly Model - 03.Mating the First Part.mp4 |
4.78MB |
| 03.CSWA Assembly Model - 04.Using SmartMates.mp4 |
5.39MB |
| 03.CSWA Assembly Model - 05.Mating the Remaining Components.mp4 |
10.24MB |
| 03.CSWA Assembly Model - 06.Answering the Question.mp4 |
5.90MB |
| 03.Lights - 01.What are Lights.mp4 |
4.50MB |
| 03.Lights - 01.What are Lights.mp4 |
4.50MB |
| 03.Lights - 02.Ambient Light.mp4 |
3.69MB |
| 03.Lights - 02.Ambient Light.mp4 |
3.69MB |
| 03.Lights - 03.Directional Light.mp4 |
5.81MB |
| 03.Lights - 03.Directional Light.mp4 |
5.81MB |
| 03.Lights - 04.Point Light.mp4 |
4.29MB |
| 03.Lights - 04.Point Light.mp4 |
4.29MB |
| 03.Lights - 05.Spot Light.mp4 |
6.24MB |
| 03.Lights - 05.Spot Light.mp4 |
6.24MB |
| 03.Machinable Features - 01.2.5 Axis Features.mp4 |
714.21KB |
| 03.Machinable Features - 02.Machinable Features.mp4 |
2.23MB |
| 03.Machinable Features - 03.Face.mp4 |
2.38MB |
| 03.Machinable Features - 04.Pockets - I.mp4 |
7.51MB |
| 03.Machinable Features - 05.Pockets - II.mp4 |
4.71MB |
| 03.Machinable Features - 06.Pockets III.mp4 |
3.74MB |
| 03.Machinable Features - 07.Bosses.mp4 |
7.96MB |
| 03.Machinable Features - 08.Part Perimeter.mp4 |
4.16MB |
| 03.Machinable Features - 09.Open Profile.mp4 |
3.36MB |
| 03.Machinable Features - 10.Slots.mp4 |
2.82MB |
| 03.Machinable Features - 11.Holes.mp4 |
3.79MB |
| 03.Machinable Features - 12.Linear Feature Pattern.mp4 |
6.43MB |
| 03.Machinable Features - 13.Circular Feature Pattern.mp4 |
5.56MB |
| 03.Machinable Features - 14.Engraving.mp4 |
4.64MB |
| 03.Parts and Features - 01.Direct Input of Equations.mp4 |
1.94MB |
| 03.Parts and Features - 02.Intersect.mp4 |
6.09MB |
| 03.Parts and Features - 03.Multibody Library Features.mp4 |
3.13MB |
| 03.Parts and Features - 04.Configuration Switching.mp4 |
2.50MB |
| 03.Parts and Features - 05.Linear Patterns.mp4 |
5.37MB |
| 03.Parts and Features - 06.Center of Mass.mp4 |
6.18MB |
| 03.Parts and Features - 07.Defeature Linking.mp4 |
3.77MB |
| 03.Parts and Features - 08.Weldment Bounding Boxes.mp4 |
3.06MB |
| 03.Parts and Features - 09.Design Tables for Materials.mp4 |
1.41MB |
| 03.Parts and Features - 10.Mounting Boss.mp4 |
5.07MB |
| 03.Parts and Features - 11.Thin Extrudes.mp4 |
3.22MB |
| 03.Sketched Features - 01.Sketched Features Introduction.mp4 |
702.57KB |
| 03.Sketched Features - 02.Extruded Boss.mp4 |
10.29MB |
| 03.Sketched Features - 03.Contours and Thin Features.mp4 |
3.99MB |
| 03.Sketched Features - 04.Extruded Cut.mp4 |
2.88MB |
| 03.Sketched Features - 05.Revolved Boss.mp4 |
4.06MB |
| 03.Sketched Features - 06.Revolved Cut.mp4 |
551.47KB |
| 03.Sketched Features - 07.Sweep.mp4 |
6.73MB |
| 03.Sketched Features - 08.Loft.mp4 |
8.43MB |
| 03.Sketched Features - 09.Ribs.mp4 |
6.77MB |
| 03.Turning Exercise - 01.Part Exercise 1A.mp4 |
2.84MB |
| 03.Turning Exercise - 02.Part Exercise 1B.mp4 |
8.36MB |
| 03.Turning Exercise - 03.Part Exercise 1C.mp4 |
10.32MB |
| 04.Advanced Mate Types - 01.Symmetric Mate.mp4 |
2.57MB |
| 04.Advanced Mate Types - 02.Width Mate.mp4 |
4.65MB |
| 04.Advanced Mate Types - 03.Path Mate.mp4 |
2.38MB |
| 04.Advanced Mate Types - 04.Linear Coupler Mate.mp4 |
2.28MB |
| 04.Advanced Mate Types - 05.Cam Mate.mp4 |
4.05MB |
| 04.Advanced Mate Types - 06.Gear Mate.mp4 |
7.17MB |
| 04.Advanced Mate Types - 07.Rack and Pinion Mate.mp4 |
6.05MB |
| 04.Advanced Mate Types - 08.Screw Mate.mp4 |
3.27MB |
| 04.Advanced Mate Types - 09.Limit Mate.mp4 |
5.74MB |
| 04.Advanced Mate Types - 10.Hinge Mate.mp4 |
3.30MB |
| 04.Advanced Mate Types - 11.Mate References.mp4 |
4.41MB |
| 04.Advanced Mate Types - 12.Extracting Mate References.mp4 |
3.26MB |
| 04.Advanced Mate Types - 13.Mate Reference Pairs.mp4 |
6.42MB |
| 04.Applied Features - 01.Applied Features Introductlon.mp4 |
358.27KB |
| 04.Applied Features - 02.Fillets.mp4 |
8.98MB |
| 04.Applied Features - 03.Chamfers.mp4 |
5.20MB |
| 04.Applied Features - 04.Shell.mp4 |
4.75MB |
| 04.Applied Features - 05.3D Mirroring.mp4 |
3.32MB |
| 04.Applied Features - 06.Planes.mp4 |
3.39MB |
| 04.Applied Features - 07.Mirroring Bodies.mp4 |
1.24MB |
| 04.Applied Features - 08.Linear Patterns.mp4 |
3.86MB |
| 04.Applied Features - 09.Circular Patterns.mp4 |
1.84MB |
| 04.Applied Features - 10.Varying Patterns.mp4 |
5.56MB |
| 04.Applied Features - 11.Fill Patterns.mp4 |
5.46MB |
| 04.Applied Features - 12.Curve Driven Pattern.mp4 |
5.50MB |
| 04.Applied Features - 13.Creating Axes.mp4 |
1.83MB |
| 04.Applied Features - 14.Planes 2.mp4 |
4.80MB |
| 04.Applied Features - 15.Hole Wizard.mp4 |
6.25MB |
| 04.Applied Features - 16.Draft.mp4 |
4.25MB |
| 04.Assemblies - 01.Inserting Components.mp4 |
5.37MB |
| 04.Assemblies - 02.Assembly Visualization.mp4 |
6.09MB |
| 04.Assemblies - 03.Breaking References.mp4 |
3.85MB |
| 04.Assemblies - 04.Envelopes.mp4 |
6.27MB |
| 04.Assemblies - 05.Subassemblies.mp4 |
5.03MB |
| 04.Assemblies - 06.Multiple Exglodeq Views per Configuratlon.mp4 |
2.90MB |
| 04.Assemblies - 07.Interference Detection.mp4 |
5.29MB |
| 04.Assemblies - 08.Large Assemblies.mp4 |
4.03MB |
| 04.Assemblies - 09.Snapshots.mp4 |
9.05MB |
| 04.Assemblies - 10.Swept Cut.mp4 |
2.45MB |
| 04.Assemblies - 11.SpeedPak.mp4 |
6.85MB |
| 04.CAMWorks Customization - 01.Setting up CAMWorks.mp4 |
2.72MB |
| 04.CAMWorks Customization - 02.Adding Machines.mp4 |
4.38MB |
| 04.CAMWorks Customization - 03.User Defined Strategies - A.mp4 |
16.38MB |
| 04.CAMWorks Customization - 04.User Defined Strategies - B.mp4 |
7.10MB |
| 04.CAMWorks Customization - 05.Adding Tools.mp4 |
4.33MB |
| 04.CAMWorks Customization - 06.Setting up Tool Cribs.mp4 |
3.95MB |
| 04.CAMWorks Customization - 07.Linking the Database.mp4 |
2.77MB |
| 04.CAMWorks Customization - 08.Restoring the Database.mp4 |
3.42MB |
| 04.CAMWorks Customization - 09.CAMWorks Options.mp4 |
7.14MB |
| 04.CSWA Drawings Questions - Multiple Choice - 01.Multiple Choice Section Overview.mp4 |
2.11MB |
| 04.CSWA Drawings Questions - Multiple Choice - 02.Model View.mp4 |
1.14MB |
| 04.CSWA Drawings Questions - Multiple Choice - 03.Projected View.mp4 |
1.16MB |
| 04.CSWA Drawings Questions - Multiple Choice - 04.Auxiliary View.mp4 |
895.14KB |
| 04.CSWA Drawings Questions - Multiple Choice - 05.Section View.mp4 |
1.57MB |
| 04.CSWA Drawings Questions - Multiple Choice - 06.Partial Section.mp4 |
1.14MB |
| 04.CSWA Drawings Questions - Multiple Choice - 07.Aligned Section.mp4 |
1.38MB |
| 04.CSWA Drawings Questions - Multiple Choice - 08.Broken Out Section.mp4 |
834.72KB |
| 04.CSWA Drawings Questions - Multiple Choice - 09.Detail View.mp4 |
561.34KB |
| 04.CSWA Drawings Questions - Multiple Choice - 10.Relative to Model.mp4 |
1.78MB |
| 04.CSWA Drawings Questions - Multiple Choice - 11.Standard 3 View.mp4 |
404.49KB |
| 04.CSWA Drawings Questions - Multiple Choice - 12.Break View.mp4 |
419.40KB |
| 04.CSWA Drawings Questions - Multiple Choice - 13.Cropped View.mp4 |
629.02KB |
| 04.CSWA Drawings Questions - Multiple Choice - 14.Alternate Position View.mp4 |
896.61KB |
| 04.CSWA Drawings Questions - Multiple Choice - 15.Empty View.mp4 |
989.20KB |
| 04.CSWA Drawings Questions - Multiple Choice - 16.Predefined View.mp4 |
1.62MB |
| 04.Sheet Metal Drawings - 01.Sheet Metal Drawings.mp4 |
5.33MB |
| 04.Sheet Metal Drawings - 02.Punch Tables.mp4 |
5.53MB |
| 04.Sheet Metal Drawings - 03.Export to DXF-DWG.mp4 |
2.67MB |
| 04.Sweeps - 01.Introduction to Sweeps.mp4 |
2.25MB |
| 04.Sweeps - 02.The Basic Sweep.mp4 |
7.31MB |
| 04.Sweeps - 03.Path Options.mp4 |
4.44MB |
| 04.Sweeps - 04.Guide Curves.mp4 |
6.35MB |
| 04.Sweeps - 05.Multiple Guide Curves.mp4 |
4.19MB |
| 04.Sweeps - 06.Profile Orientation.mp4 |
8.71MB |
| 04.Sweeps - 07.Twist.mp4 |
5.12MB |
| 04.Sweeps - 08.Swept Cut.mp4 |
3.31MB |
| 04.Sweeps - 09.Threads.mp4 |
13.08MB |
| 04.Turn Features - 01.Face Feature.mp4 |
2.78MB |
| 04.Turn Features - 02.OD Feature.mp4 |
3.98MB |
| 04.Turn Features - 03.Grooves.mp4 |
2.61MB |
| 04.Turn Features - 04.ID Feature.mp4 |
2.83MB |
| 04.Turn Features - 05.Cutoff Feature.mp4 |
3.62MB |
| 04.Views - 01.Standard Views.mp4 |
5.77MB |
| 04.Views - 01.Standard Views.mp4 |
5.77MB |
| 04.Views - 02.Custom Views.mp4 |
3.59MB |
| 04.Views - 02.Custom Views.mp4 |
3.59MB |
| 04.Views - 03.Viewports.mp4 |
2.70MB |
| 04.Views - 03.Viewports.mp4 |
2.70MB |
| 04.Views - 04.The View Cube.mp4 |
1.40MB |
| 04.Views - 04.Updating Views.mp4 |
3.70MB |
| 04.Views - 05.The View Cube.mp4 |
1.40MB |
| 04.Wheel - 01.Revolve Feature.mp4 |
22.94MB |
| 04.Wheel - 02.Cutout and Circular Pattern.mp4 |
6.13MB |
| 05.Assemblies - 01.Assembly Overview.mp4 |
2.69MB |
| 05.Assemblies - 02.Starting an Assembly.mp4 |
7.20MB |
| 05.Assemblies - 03.Inserting Additional Components.mp4 |
4.95MB |
| 05.Assemblies - 04.Move Components.mp4 |
7.91MB |
| 05.Assemblies - 05.Mating the Wheel.mp4 |
16.59MB |
| 05.Assemblies - 06.Mating the Pin.mp4 |
8.73MB |
| 05.Assemblies - 07.Toolbox.mp4 |
8.94MB |
| 05.Assemblies - 08.Exploded View.mp4 |
7.96MB |
| 05.Assemblies - 09.Working With Sub-Assemblies.mp4 |
6.01MB |
| 05.Cameras - 01.Introducing Cameras.mp4 |
1.86MB |
| 05.Cameras - 01.Introducing Cameras.mp4 |
1.86MB |
| 05.Cameras - 02.Adding Cameras.mp4 |
7.97MB |
| 05.Cameras - 02.Adding Cameras.mp4 |
7.97MB |
| 05.Cameras - 03.Showing Cameras.mp4 |
2.97MB |
| 05.Cameras - 03.Showing Cameras.mp4 |
2.97MB |
| 05.Cameras - 04.Camera View.mp4 |
1.67MB |
| 05.Cameras - 04.Camera View.mp4 |
1.67MB |
| 05.Cameras - 05.Walkthroughs.mp4 |
10.34MB |
| 05.Cameras - 05.Walkthroughs.mp4 |
10.34MB |
| 05.CSWP Part Model - 01.Problem Overview.mp4 |
3.96MB |
| 05.CSWP Part Model - 02.Developing a Strategy.mp4 |
6.83MB |
| 05.CSWP Part Model - 03.Where to Begin.mp4 |
6.58MB |
| 05.CSWP Part Model - 04.The Cylinder and Cone.mp4 |
8.33MB |
| 05.CSWP Part Model - 05.The Rectangular Flange.mp4 |
3.21MB |
| 05.CSWP Part Model - 06.The First Screw Lug.mp4 |
9.52MB |
| 05.CSWP Part Model - 07.The Screw Lug Pattern.mp4 |
5.25MB |
| 05.CSWP Part Model - 08.The Base Plate.mp4 |
5.08MB |
| 05.CSWP Part Model - 09.The Rib Structure.mp4 |
9.79MB |
| 05.CSWP Part Model - 10.The Foot Pads.mp4 |
5.28MB |
| 05.CSWP Part Model - 11.The Top Boss.mp4 |
9.22MB |
| 05.CSWP Part Model - 12.The Tapped Holes.mp4 |
3.89MB |
| 05.CSWP Part Model - 13.Adding Fillets.mp4 |
15.27MB |
| 05.CSWP Part Model - 14.Answering the Question.mp4 |
6.37MB |
| 05.Drawings and Detailing - 01.Balloons.mp4 |
5.13MB |
| 05.Drawings and Detailing - 02.Dimensions.mp4 |
9.59MB |
| 05.Drawings and Detailing - 03.Section Views.mp4 |
5.77MB |
| 05.Drawings and Detailing - 04.Convert Drawing View to Sketch and Save as DWG.mp4 |
4.43MB |
| 05.Drawings and Detailing - 05.Convert Drawing View to Sketch and Block.mp4 |
4.02MB |
| 05.Drawings and Detailing - 06.Layers.mp4 |
6.10MB |
| 05.Drawings and Detailing - 07.Annotations.mp4 |
11.86MB |
| 05.Drawings and Detailing - 08.JIS Weld Symbols.mp4 |
2.87MB |
| 05.Drawings and Detailing - 09.Tables.mp4 |
4.72MB |
| 05.Lofts - 01.Introduction to Lofts.mp4 |
1.95MB |
| 05.Lofts - 02.The Basic Loft.mp4 |
8.04MB |
| 05.Lofts - 03.Closing a Loft.mp4 |
1.18MB |
| 05.Lofts - 04.Loft Profiles.mp4 |
4.70MB |
| 05.Lofts - 05.Start-End Constraints.mp4 |
8.08MB |
| 05.Lofts - 06.Guide Curves.mp4 |
4.35MB |
| 05.Lofts - 07.Profile Geometry.mp4 |
7.33MB |
| 05.Lofts - 08.Centerline.mp4 |
3.27MB |
| 05.Lofts - 09.Adding Loft Sections.mp4 |
4.12MB |
| 05.Lofts - 10.Cutting with a Loft.mp4 |
2.20MB |
| 05.Parts - 01.Introducing Parts.mp4 |
1.53MB |
| 05.Parts - 02.Starting a Part.mp4 |
4.17MB |
| 05.Parts - 03.Picking a Plane.mp4 |
2.72MB |
| 05.Parts - 04.Design Intent.mp4 |
9.78MB |
| 05.Parts - 05.Symmetry A.mp4 |
7.22MB |
| 05.Parts - 06.Symmetry B.mp4 |
7.92MB |
| 05.Parts - 07.Editing Parts.mp4 |
7.25MB |
| 05.Parts - 08.Instant 3D.mp4 |
4.93MB |
| 05.Parts - 09.Feature Suppression.mp4 |
2.47MB |
| 05.Parts - 10.Parent Child Relations.mp4 |
4.52MB |
| 05.Parts - 11.Measure.mp4 |
5.56MB |
| 05.Parts - 12.Materials.mp4 |
7.29MB |
| 05.Parts - 13.Mass Properties.mp4 |
4.08MB |
| 05.Parts - 14.Custom Properties.mp4 |
3.81MB |
| 05.Parts - 15.Configurations - Intro.mp4 |
4.70MB |
| 05.Parts - 16.Configurations - Dim Changes.mp4 |
5.62MB |
| 05.Parts - 17.Configurations - Feat. Supp..mp4 |
5.12MB |
| 05.Parts - 18.Configurations - Table.mp4 |
7.05MB |
| 05.Parts - 19.Design Tables - Intro.mp4 |
1.95MB |
| 05.Parts - 20.Design Tables - Rename Dims.mp4 |
5.07MB |
| 05.Parts - 21.Design Tables - Creating.mp4 |
4.51MB |
| 05.Parts - 22.Design Tables for Features.mp4 |
6.00MB |
| 05.Troubleshooting Mates - 01.Assembly Mate Errors.mp4 |
5.37MB |
| 05.Troubleshooting Mates - 02.Repairing Mate Errors - A.mp4 |
5.22MB |
| 05.Troubleshooting Mates - 03.Repairing Mate Errors - B.mp4 |
4.93MB |
| 05.Troubleshooting Mates - 04.Mate Xpert.mp4 |
8.73MB |
| 05.Troubleshooting Mates - 05.Replace Mate Entities.mp4 |
7.80MB |
| 06.Assemblies - 01.Introducing Assemblies.mp4 |
600.44KB |
| 06.Assemblies - 02.Starting an Assembly.mp4 |
3.17MB |
| 06.Assemblies - 03.Inserting Components.mp4 |
3.75MB |
| 06.Assemblies - 04.Positioning Parts.mp4 |
4.59MB |
| 06.Assemblies - 05.Adding Mates.mp4 |
6.80MB |
| 06.Assemblies - 06.Coincident Mate.mp4 |
3.48MB |
| 06.Assemblies - 07.Distance Mate.mp4 |
929.74KB |
| 06.Assemblies - 08.Concentric Mate.mp4 |
745.80KB |
| 06.Assemblies - 09.Tangent Mate.mp4 |
1.47MB |
| 06.Assemblies - 10.Smart Mates.mp4 |
4.83MB |
| 06.Assemblies - 11.Multiple Mate Mode.mp4 |
3.64MB |
| 06.Assemblies - 13.Assembly Appearances.mp4 |
4.76MB |
| 06.Assemblies - 14.Hide and Show Components.mp4 |
4.86MB |
| 06.Assemblies - 15.Interference Detection.mp4 |
7.64MB |
| 06.Assemblies - 16.Collision Detection.mp4 |
3.18MB |
| 06.Assemblies - 17.Dynamic Clearance.mp4 |
2.05MB |
| 06.Assemblies - 18.Exploding Assemblies.mp4 |
6.02MB |
| 06.Assemblies - 19.Intro to Top Down Design I.mp4 |
4.49MB |
| 06.Assemblies - 20.Intro to Top Down Design II.mp4 |
2.76MB |
| 06.Assemblies - 21.Assembly Bill of Materials.mp4 |
4.24MB |
| 06.Assembly Configurations - 01.Assembly Configurations - Part A.mp4 |
3.55MB |
| 06.Assembly Configurations - 02.Assembly Configurations - Part B.mp4 |
6.06MB |
| 06.Assembly Configurations - 03.Advanced Options.mp4 |
11.00MB |
| 06.Assembly Configurations - 04.Automatic Part Configurations.mp4 |
8.45MB |
| 06.Assembly Configurations - 05.Assembly Design Tables Part A.mp4 |
6.91MB |
| 06.Assembly Configurations - 06.Assembly Design Tables Part B.mp4 |
5.32MB |
| 06.Assembly Configurations - 07.SpeedPak.mp4 |
7.54MB |
| 06.Boundary Features - 01.Boundary Boss-Base.mp4 |
9.07MB |
| 06.Boundary Features - 02.Boundary Cut.mp4 |
2.51MB |
| 06.CSWP Configurations and Part Modification - 01.Introduction to Configurations.mp4 |
1.35MB |
| 06.CSWP Configurations and Part Modification - 02.Configurations Question.mp4 |
2.37MB |
| 06.CSWP Configurations and Part Modification - 03.Adding and Modifying Configurations.mp4 |
6.29MB |
| 06.CSWP Configurations and Part Modification - 04.Design Table Question.mp4 |
4.06MB |
| 06.CSWP Configurations and Part Modification - 05.Part Modiication Question.mp4 |
2.71MB |
| 06.CSWP Configurations and Part Modification - 06.Part Modification Exercise.mp4 |
14.18MB |
| 06.Decals - 01.Introduction to Decals.mp4 |
970.51KB |
| 06.Decals - 01.Introduction to Decals.mp4 |
970.51KB |
| 06.Decals - 02.Decal Editor.mp4 |
1005.91KB |
| 06.Decals - 02.Decal Editor.mp4 |
1005.91KB |
| 06.Decals - 03.Creating Decals.mp4 |
4.46MB |
| 06.Decals - 03.Creating Decals.mp4 |
4.46MB |
| 06.Decals - 04.Applyil1g Decals.mp4 |
2.95MB |
| 06.Decals - 04.Applyil1g Decals.mp4 |
2.95MB |
| 06.Decals - 05.Mapping Decals.mp4 |
4.94MB |
| 06.Decals - 05.Mapping Decals.mp4 |
4.94MB |
| 06.Decals - 06.Decal Illumination.mp4 |
2.59MB |
| 06.Decals - 06.Decal Illumination.mp4 |
2.59MB |
| 06.Decals - 07.Masking.mp4 |
4.30MB |
| 06.Decals - 07.Masking.mp4 |
4.30MB |
| 06.Drawings - 01.Drawings Overview - Starting a New Drawing.mp4 |
5.99MB |
| 06.Drawings - 02.Model Views.mp4 |
12.62MB |
| 06.Drawings - 03.Projected Views.mp4 |
2.20MB |
| 06.Drawings - 04.Model Items.mp4 |
7.21MB |
| 06.Drawings - 05.Dimensions.mp4 |
4.59MB |
| 06.Drawings - 06.Associativity.mp4 |
3.80MB |
| 06.Drawings - 07.Annotations.mp4 |
5.80MB |
| 06.Drawings - 08.Detail View.mp4 |
4.57MB |
| 06.Drawings - 09.Section View.mp4 |
5.65MB |
| 06.Drawings - 10.Assembly Drawing.mp4 |
8.89MB |
| 06.Drawings - 11.Bill of Materials.mp4 |
7.00MB |
| 06.Drawings - 12.Balloons.mp4 |
5.65MB |
| 06.Sheet Metal - 01.Bend Notes.mp4 |
4.58MB |
| 06.Sheet Metal - 02.Forming Tools.mp4 |
5.93MB |
| 06.Sheet Metal - 03.Multibody Sheet Metal Parts.mp4 |
4.69MB |
| 07.CSWP Assembly Model - 01.Problem Overview.mp4 |
2.08MB |
| 07.CSWP Assembly Model - 02.Modeling the First Component.mp4 |
11.34MB |
| 07.CSWP Assembly Model - 03.Starting the Assembly.mp4 |
4.41MB |
| 07.CSWP Assembly Model - 04.Making Changes to the Model.mp4 |
2.68MB |
| 07.CSWP Assembly Model - 05.In-context Considerations.mp4 |
3.77MB |
| 07.CSWP Assembly Model - 06.Modeling the Slider.mp4 |
763.00KB |
| 07.CSWP Assembly Model - 07.Mating the First Slider.mp4 |
3.97MB |
| 07.CSWP Assembly Model - 08.Slider In-context Relations.mp4 |
4.55MB |
| 07.CSWP Assembly Model - 09.Adding the Second Slider.mp4 |
5.25MB |
| 07.CSWP Assembly Model - 10.Making a Change to the Assembly.mp4 |
4.92MB |
| 07.CSWP Assembly Model - 11.Modeling the Rotor Component.mp4 |
7.38MB |
| 07.CSWP Assembly Model - 12.Rotor - In-context Relation 1.mp4 |
2.74MB |
| 07.CSWP Assembly Model - 13.Rotor - In-context Relation 2.mp4 |
9.62MB |
| 07.CSWP Assembly Model - 14.Rotor - In-context Relation 3.mp4 |
10.79MB |
| 07.CSWP Assembly Model - 15.Testing In-context Relations.mp4 |
4.60MB |
| 07.CSWP Assembly Model - 16.Further Testing of In-context Relations.mp4 |
6.37MB |
| 07.CSWP Assembly Model - 17.Simulate Motion.mp4 |
9.44MB |
| 07.CSWP Assembly Model - 18.Other Possible Assembly Question Types.mp4 |
10.23MB |
| 07.CSWP Assembly Model - 19.Final Comments.mp4 |
1.52MB |
| 07.Display States - 01.What is a Display State.mp4 |
1.34MB |
| 07.Display States - 01.What is a Display State.mp4 |
1.34MB |
| 07.Display States - 02.Adding Display States.mp4 |
5.22MB |
| 07.Display States - 02.Adding Display States.mp4 |
5.22MB |
| 07.Display States - 03.Assembly Display States.mp4 |
6.17MB |
| 07.Display States - 03.Assembly Display States.mp4 |
6.17MB |
| 07.Dome and Wrap - 01.Dome.mp4 |
5.45MB |
| 07.Dome and Wrap - 02.Wrap.mp4 |
5.06MB |
| 07.Routing - 01.Routing General Enhancements.mp4 |
5.43MB |
| 07.Routing - 02.AutoRoute.mp4 |
4.76MB |
| 07.Routing - 03.Tubing Drawings.mp4 |
4.18MB |
| 07.Routing - 04.Slopes for Pipe Routes.mp4 |
5.27MB |
| 07.Routing - 05.Ribbon Cables.mp4 |
3.62MB |
| 07.Top Down Assembly Design - 01.Introduction to Top Down Assembly Design.mp4 |
1.20MB |
| 07.Top Down Assembly Design - 02.Edit Part Mode.mp4 |
7.11MB |
| 07.Top Down Assembly Design - 03.Component Visibility.mp4 |
5.35MB |
| 07.Top Down Assembly Design - 04.In-Context Features Part A.mp4 |
6.97MB |
| 07.Top Down Assembly Design - 05.In-Context Features Part B.mp4 |
4.87MB |
| 07.Top Down Assembly Design - 06.Inserting a New Component.mp4 |
9.19MB |
| 07.Top Down Assembly Design - 07.Remove External References Part A.mp4 |
8.29MB |
| 07.Top Down Assembly Design - 08.Remove External References Part B.mp4 |
4.90MB |
| 07.Top Down Assembly Design - 09.Remove External References Part C.mp4 |
7.44MB |
| 07.Top Down Assembly Design - 10.No External References.mp4 |
2.28MB |
| 07.Top Down Assembly Design - 11.Virtual Components.mp4 |
6.76MB |
| 08.CSWE Sample Question Types - 01.CSWE Question Type Overview.mp4 |
1.55MB |
| 08.CSWE Sample Question Types - 02.Direct Editing Example.mp4 |
7.62MB |
| 08.CSWE Sample Question Types - 03.Advanced Feature Example.mp4 |
3.56MB |
| 08.CSWE Sample Question Types - 04.Advanced Reference Geometry Example.mp4 |
5.06MB |
| 08.CSWE Sample Question Types - 05.Multibody Techniques Example.mp4 |
4.03MB |
| 08.Flex Feature - 01.Flex Feature Introduction.mp4 |
547.29KB |
| 08.Flex Feature - 02.Flex Overview.mp4 |
13.03MB |
| 08.Flex Feature - 03.Bending.mp4 |
5.82MB |
| 08.Flex Feature - 04.Twisting.mp4 |
1.78MB |
| 08.Flex Feature - 05.Tapering and Stretching.mp4 |
4.00MB |
| 08.Simulation - 01.General Enhancements and Interface.mp4 |
3.77MB |
| 08.Simulation - 02.Beams.mp4 |
4.59MB |
| 08.Simulation - 03.Contact.mp4 |
3.25MB |
| 08.Simulation - 04.Design Studies (Materials).mp4 |
5.56MB |
| 08.Simulation - 05.Results.mp4 |
3.90MB |
| 09.After the Exam - 01.How To View Your Exam Results.mp4 |
2.29MB |
| 09.After the Exam - 02.Accessing your Certificates and Logos.mp4 |
1020.70KB |
| 09.After the Exam - 03.Getting Listed in the Online Directory.mp4 |
933.47KB |
| 09.Indent Feature - 01.Indent Feature.mp4 |
5.86MB |
| 09.Indent Feature - 02.Using Multiple Tool Bodies.mp4 |
3.28MB |
| 09.Indent Feature - 03.Multiple Tool Regions.mp4 |
3.12MB |
| 09.Indent Feature - 04.Surfaces and the Cut Option.mp4 |
1.73MB |
| 10.Multibody Parts - 01.Multibody Parts.mp4 |
4.45MB |
| 10.Multibody Parts - 02.Creating Multiple Bodies.mp4 |
3.36MB |
| 10.Multibody Parts - 03.Splitting Bodies A.mp4 |
4.56MB |
| 10.Multibody Parts - 04.Splitting Bodies B.mp4 |
7.76MB |
| 10.Multibody Parts - 05.Mulitbody Design Techniques.mp4 |
7.03MB |
| 10.Multibody Parts - 06.Combining Multiple Bodies.mp4 |
8.39MB |
| 10.Multibody Parts - 07.Intersect.mp4 |
5.79MB |
| 10.Multibody Parts - 08.Swept Cuts with Bodies.mp4 |
5.09MB |
| 10.Multibody Parts - 09.Additional Techniques.mp4 |
7.26MB |
| 10.Multibody Parts - 10.Positioning Bodies.mp4 |
6.31MB |
| 10.Multibody Parts - 11.Multibody Exploded View.mp4 |
6.81MB |
| 2013-AdvancedAssemblies.zip |
62.52MB |
| 2013-AdvancedParts.zip |
30.10MB |
| 2013-CAMWorksMill.zip |
5.39MB |
| 2013-CAMWorksMill-3Axis.zip |
11.23MB |
| 2013-CAMWorksTurn.zip |
1.35MB |
| 2013-CoreConcepts.zip |
24.88MB |
| 2013-CSWAPrepCourse.zip |
3.08MB |
| 2013-CSWPCSWEPrepCourse.zip |
12.62MB |
| 2013-Drawings.zip |
11.68MB |
| 2013-FileManagement.zip |
2.26MB |
| 2013-MoldTools.zip |
10.83MB |
| 2013-PhotoView360.zip |
98.60MB |
| 2013-SheetMetal.zip |
6.97MB |
| 2013-SimulationXpress.zip |
2.16MB |
| 2013-SolidWorksForBeginners.zip |
3.08MB |
| 2013-SurfacingEssentials.zip |
6.83MB |
| 2013-TolAnalyst.zip |
3.54MB |
| 2013-ToolboxandDesignLibrary.zip |
2.44MB |
| 2013-VisualizationandAppearances.zip |
150.84MB |
| 2013-Weldments.zip |
4.04MB |
| V100Q1.flv |
39.67MB |
| V101Q1.flv |
15.97MB |
| V102Q1.flv |
21.05MB |
| V103Q1.flv |
18.18MB |
| V104Q1.flv |
13.74MB |
| V105Q1.flv |
19.47MB |
| V106Q1.flv |
11.53MB |
| V107Q1.flv |
13.12MB |
| V108Q1.flv |
12.09MB |
| V109Q1.flv |
14.98MB |
| V10Q1.flv |
2.83MB |
| V10Q2.flv |
1.67MB |
| V110Q1.flv |
27.51MB |
| V111Q1.flv |
16.32MB |
| V112Q1.flv |
22.60MB |
| V113Q1.flv |
18.53MB |
| V114Q1.flv |
31.84MB |
| V115Q1.flv |
12.02MB |
| V116Q1.flv |
23.24MB |
| V117Q1.flv |
27.88MB |
| V118Q1.flv |
54.32MB |
| V119Q1.flv |
16.91MB |
| V11Q1.flv |
2.20MB |
| V11Q2.flv |
3.22MB |
| V11Q3.flv |
4.95MB |
| V120Q1.flv |
14.03MB |
| V121Q1.flv |
21.38MB |
| V122Q1.flv |
13.55MB |
| V123Q1.flv |
12.12MB |
| V124Q1.flv |
17.85MB |
| V125Q1.flv |
11.77MB |
| V126Q1.flv |
6.44MB |
| V127Q1.flv |
10.35MB |
| V128Q1.flv |
5.15MB |
| V129Q1.flv |
9.64MB |
| V12Q1.flv |
3.11MB |
| V12Q2.flv |
2.83MB |
| V12Q3.flv |
8.38MB |
| V130Q1.flv |
5.58MB |
| V131Q1.flv |
8.49MB |
| V132Q1.flv |
7.12MB |
| V133Q1.flv |
7.05MB |
| V134Q1.flv |
7.48MB |
| V135Q1.flv |
10.13MB |
| V136Q1.flv |
6.79MB |
| V137Q1.flv |
5.34MB |
| V138Q1.flv |
7.93MB |
| V139Q1.flv |
10.11MB |
| V13Q1.flv |
6.38MB |
| V13Q2.flv |
2.97MB |
| V13Q3.flv |
1.75MB |
| V140Q1.mp4 |
7.46MB |
| V141Q1.mp4 |
13.96MB |
| V142Q1.mp4 |
6.52MB |
| V143Q1.mp4 |
11.54MB |
| V144Q1.mp4 |
6.06MB |
| V145Q1.mp4 |
12.76MB |
| V146Q1.mp4 |
4.84MB |
| V147Q1.mp4 |
12.95MB |
| V148Q1.mp4 |
5.53MB |
| V149Q1.mp4 |
8.33MB |
| V14Q1.flv |
4.06MB |
| V14Q2.flv |
2.28MB |
| V14Q3.flv |
4.68MB |
| V150Q1.mp4 |
3.35MB |
| V151Q1.mp4 |
3.93MB |
| V15Q1.flv |
7.85MB |
| V15Q2.flv |
5.29MB |
| V15Q3.flv |
7.84MB |
| V16Q1.flv |
3.08MB |
| V16Q2.flv |
2.75MB |
| V16Q3.flv |
3.47MB |
| V17Q1.flv |
4.17MB |
| V17Q2.flv |
6.43MB |
| V17Q3.flv |
4.36MB |
| V18Q1.flv |
3.56MB |
| V18Q2.flv |
4.54MB |
| V18Q3.flv |
3.95MB |
| V19Q1.flv |
1.74MB |
| V19Q2.flv |
2.06MB |
| V1Q1.flv |
3.58MB |
| V1Q2.flv |
5.87MB |
| V1Q3.flv |
6.17MB |
| V20Q1.flv |
3.14MB |
| V20Q2.flv |
4.64MB |
| V20Q3.flv |
3.59MB |
| V21Q1.flv |
3.17MB |
| V21Q2.flv |
2.10MB |
| V21Q3.flv |
4.51MB |
| V22Q1.flv |
3.70MB |
| V22Q2.flv |
4.27MB |
| V22Q3.flv |
4.47MB |
| V23Q1.flv |
2.72MB |
| V23Q2.flv |
2.95MB |
| V23Q3.flv |
4.23MB |
| V24Q1.flv |
5.13MB |
| V24Q2.flv |
2.65MB |
| V24Q3.flv |
5.07MB |
| V25Q1.flv |
2.72MB |
| V25Q2.flv |
2.54MB |
| V25Q3.flv |
2.98MB |
| V26Q1.flv |
4.66MB |
| V26Q2.flv |
4.94MB |
| V26Q3.flv |
5.37MB |
| V27Q1.flv |
5.64MB |
| V27Q2.flv |
6.57MB |
| V27Q3.flv |
7.16MB |
| V28Q1.flv |
4.35MB |
| V28Q2.flv |
3.43MB |
| V28Q3.flv |
4.67MB |
| V29Q1.flv |
4.15MB |
| V29Q2.flv |
5.13MB |
| V29Q3.flv |
7.53MB |
| V2Q1.flv |
4.31MB |
| V2Q2.flv |
4.38MB |
| V2Q3.flv |
3.21MB |
| V30Q1.flv |
4.06MB |
| V31Q1.flv |
4.60MB |
| V32Q1.flv |
2.25MB |
| V33Q1.flv |
3.05MB |
| V34Q1.flv |
2.26MB |
| V35Q1.flv |
4.08MB |
| V36Q1.flv |
2.32MB |
| V37Q1.flv |
4.58MB |
| V38Q1.flv |
3.56MB |
| V3Q1.flv |
7.70MB |
| V3Q2.flv |
2.92MB |
| V3Q3.flv |
3.90MB |
| V40Q1.flv |
3.70MB |
| V41Q1.flv |
3.86MB |
| V42Q1.flv |
2.68MB |
| V43Q1.flv |
5.72MB |
| V44Q1.flv |
2.27MB |
| V45Q1.flv |
2.97MB |
| V46Q1.flv |
4.34MB |
| V47Q1.flv |
2.86MB |
| V48Q1.flv |
2.98MB |
| V49Q1.flv |
2.19MB |
| V4Q1.flv |
3.35MB |
| V4Q2.flv |
4.04MB |
| V4Q3.flv |
6.07MB |
| V50Q1.flv |
3.90MB |
| V51Q1.flv |
7.87MB |
| V52Q1.flv |
4.49MB |
| V53Q1.flv |
3.17MB |
| V54Q1.flv |
12.42MB |
| V55Q1.flv |
5.69MB |
| V56Q1.flv |
4.68MB |
| V57Q1.flv |
9.71MB |
| V58Q1.flv |
4.07MB |
| V59Q1.flv |
6.27MB |
| V5Q1.flv |
4.02MB |
| V5Q2.flv |
21.56MB |
| V5Q3.flv |
3.52MB |
| V60Q1.flv |
3.69MB |
| V61Q1.flv |
8.78MB |
| V62Q1.flv |
8.65MB |
| V63Q1.flv |
2.18MB |
| V64Q1.flv |
5.28MB |
| V65Q1.flv |
8.60MB |
| V66Q1.flv |
4.80MB |
| V67Q1.flv |
4.94MB |
| V68Q1.flv |
2.71MB |
| V69Q1.flv |
3.65MB |
| V6Q1.flv |
2.93MB |
| V6Q2.flv |
2.14MB |
| V6Q3.flv |
1.86MB |
| V70Q1.flv |
3.15MB |
| V71Q1.flv |
2.44MB |
| V72Q1.flv |
6.39MB |
| V73Q1.flv |
2.88MB |
| V74Q1.flv |
2.66MB |
| V75Q1.flv |
3.83MB |
| V76Q1.flv |
3.82MB |
| V77Q1.flv |
3.43MB |
| V78Q1.flv |
1.88MB |
| V79Q1.flv |
4.61MB |
| V7Q1.flv |
5.15MB |
| V7Q2.flv |
2.50MB |
| V7Q3.flv |
5.12MB |
| V80Q1.flv |
2.80MB |
| V81Q1.flv |
4.33MB |
| V82Q1.flv |
9.38MB |
| V83Q1.flv |
3.12MB |
| V84Q1.flv |
2.75MB |
| V85Q1.flv |
3.75MB |
| V86Q1.flv |
3.42MB |
| V87Q1.flv |
3.25MB |
| V88Q1.flv |
2.92MB |
| V89Q1.flv |
2.06MB |
| V8Q1.flv |
5.66MB |
| V8Q2.flv |
2.70MB |
| V8Q3.flv |
2.91MB |
| V90Q1.flv |
5.47MB |
| V91Q1.flv |
5.82MB |
| V92Q1.flv |
7.23MB |
| V93Q1.flv |
9.73MB |
| V94Q1.flv |
5.06MB |
| V95Q1.flv |
22.04MB |
| V96Q1.flv |
9.58MB |
| V97Q1.flv |
30.33MB |
| V98Q1.flv |
14.82MB |
| V99Q1.flv |
15.55MB |
| V9Q1.flv |
10.29MB |
| V9Q2.flv |
2.44MB |